DYNAMIC TRIGGER DIRECTION: Determines the direction of the dynamic filter for the selected band.DYNAMIC MODE ENABLE/DISABLE: Enables Dynamic mode operation for the selected band.Q: Sets the bandwidth of current filter.ĭynamic mode controls are accessible to the right of the static controls and can be enabled for each band individually.GAIN: Sets the positive/negative gain applied to the selected filter.FREQUENCY: Sets the center frequency for the selected filter.BAND SHAPE: Selects the filter shape used by the selected band.Static EQ controls for the selected Neutron 2 EQ are located on the left side of the bottom bar in the Tonal Balance Control interface. Click on the band number/shape icon directly to view the controls associated with that band.EQ bands can be enabled or disabled by clicking on the power button to the left of the band number/shape.BAND SELECTION & ENABLE/DISABLE CONTROLS:.Enable bands with double-click: Double-click in an empty spot in the spectrum display to enable a band at that frequency.Reset node to default: Double-click on a node to reset it to default values.Change filter shapes: You can change filter shapes of any visible node by right-clicking on the node and selecting the filter shape from the context menu that appears.This bypass control is useful for quick A/B comparisons. BYPASS: Momentarily bypasses EQ processing in the selected Neutron 2 plug-in.When enabled, this button will be colored orange. SOFT SATURATION: Enables/disables Soft Saturation in the selected Neutron 2 EQ.PLUG-IN SELECTION MENU: Allows you to select the instance to display/control from within the Tonal Balance Control interface.Neutron 2 plug-ins with compatible EQ controls will look something like this when selected in Tonal Balance Control: Neutron 2 plug-ins with no EQ controls will look something like this when selected in Tonal Balance Control: The following table outlines the controls and displays available when the associated Neutron 2 plug-in is selected as the incoming instance in Tonal Balance Control. Select Neutron 2 instances from the plug-in selection menu in Tonal Balance Control to modify EQ parameters remotely or view the spectrum metering of any Neutron 2 plug-in.